|
|
Industrial Paint Stripper JEM
Strip 427
|
|
STRIPS
ALL METALS
Without corroding any profits.
JEM
STRIP 427 is a powerful, biodegradable formulation that
safely strips all painted and powder coated
metals including aluminum, zinc, magnesium, and titanium
without corrosion. So instead of paying top dollar
to send challenging jobs out, you can keep your stripping
and your profits where they belong: in your own shop.
|
WORKS
FAST
So your crew can work faster.
JEM
STRIP 427 may be easy on the environment, but it's tough
on paint. Just drop the job in the tank, agitate if desired,
and in minutes you'll have a sparkling piece of metal. And
because JEM STRIP 427 has no Phenyl odor, your crew can
keep their focus where it belongs: on shipping as many parts
per hour as your daily workload demands.
|
|
LASTS
FOR YEARS
Cuts disposal fees by thousands.
With
ordinary strippers, you start with a drum full of toxic
chemicals and end up with a drum full of toxic (and slow-acting)
gunk. Add the cost of chemical disposal fees over the course
of a year, and you're looking at damage to your profits
and the environment. Only JEM STRIP 427 comes with its own
mineral oil seal to reduce evaporation and dragout while
it protects your crew from harmful odors. The result? With
proper filtration and JEM ADDITIVE 425 one tank of JEM STRIP
427 lasts for years, and reduces chemical disposal fees
to 1/6 of their former cost!
|
THE
SECRET TO
EXTENDED TANK LIFE
JEM
ADDITIVE 425 is our exclusive formulation designed to boost
the active ingredients in JEM STRIP 427, so you get the
most out of every tank.
JEM ADDITIVE 425 replaces dragout and restores the ideal
chemical balance, so a single tank of JEM STRIP 427 can
last five years or longer!
|
| JEM
STRIP 427
JEM
STRIP 427 is a powerful blend of chemicals which is
unmatched in the paint stripping industry for strength,
safety and environmental considerations. It rapidly
strips both powder and liquid coatings. Jem Strip
427 has a proficient record of achievement which we
would be glad to share with you.
Benefits:
- Contains
no methylene chloride, phenyl, chromates or caustic.
- Effective
on polyurethane, epoxies, polyamides, nylon, teflon
and other commonly used liquid and powder coatings.
- Safe
on Aluminum, Titanium, Magnesium, Stainless Steel
and High Strength Steel.
- Additives
available to replace drag out and evaporation.
- High
flash mineral oil seal floats on top of stripper to
reduce drag out, odor and evaporation.
- Stripper
may be recycled. (Some states give recycling
credit.)
- Rinse
water may be discharged to industrial waste treatment
system in most localities. (Consult local regulations.)
Uses:
JEM
STRIP 427 is used full strength at temperatures between
1600 F and 1900 F. Mineral
oil seal is supplied with the stripper. Strip
time depends on coating type, thickness and cure time.
Strip time may be decreased with mechanical agitation
and by increasing temperature.
JEM
STRIP 427 will not damage or remove previously applied
conversion coatings.
A
cold or hot water rinse is required after stripping.
Warning:
Avoid water contamination of 427 to avoid metal corrosion.
|
| Appearance |
Clear |
| Odor |
Mild |
| pH |
11.4 |
| Flash
Point |
Over
300 degrees F (TCC) |
| Rinsibility |
Complete |
|
V.O.C. |
Less
than 90 gm/ltr |
| Vapor
Pressure |
<0.0001
mm Hg |
|
