Stainless Steel Single Point Float Level Switches
Ktech Model FS801-602

Model FS801-602 Stainless Steel Single Point Float Level Switches

The FS801-602 Stainless Steel Single Point Float Level Switches set-point distances are measured from the underside of the 1/4" NPT bushing to the centre of the float at the level where the switch is activated. Switch setpoint distances are not field adjustable. The contact arrangement may be changed from normally open (NO) to normally closed (NC) and vice versa.

Remove the stop collar and turn over the float and then return the stop collar to the original position. If the contact arrangement is altered use an ohmmeter to test that the switch operatec correctly. Screw the float switch into the 1/4" NPT opening at the top of the tank. The conductors are colour coded to identify each switch. The switch must be connected in series with a load.

Model FS801-602 Construction:

• 5/16 O.D. Stainless Steel Stem

• 1" Diameter Stainless Steel Float

• 1/4" NPT Bushings

• 36" Cable Length

DO NOT CONNECT THE SWITCH DIRECTLY ACROSS THE POWER SUPPLY.

The voltage / current product must not exceed the power rating.

Model FS801-602 Specifications

• Maximum Switching Voltage
  VOLTS DC/AC - 120

• Maximum Switching Current
  AMPS DC/AC - 0.4

• Maximum Switching Power
  WATTS DC/AC - 50

• Operating Temperature Range. -25ºC to 90ºC (-13ºF to 194ºF)

	LISTED OVERFILL PROCTECTION DEVICES 4YC9
	Meets Standards: Class 1 Division 1, Groups B,C,D CSA C22.2 No. 1010-1 and ANSI /I SA S82-03 CSA C22.2 No. 30 and UL1203

FS801-602 Stainless Steel Float Switch