| Power
Source Pickups
When external power
is not available (e.g. for hazardous environments), these pickups
can power other instrumentation and controls.
M107
MAGNETIC
PICKUP: power source, standard sensitivity, standard reach
This standard magnetic pickup
can power other instruments. It has a standard sensitivity,
standard reach (2.25 inches), and a 5/8-18 inch thread.
|
M207
MAGNETIC
PICKUP: power source, low impedance
This magnetic pickup can
power other instruments. It has a low impedance which makes
it good for mid-speed (300 to 500 rpm) applications. It
also has a long reach (5.125 inches), a 3/4-16 thread and
is CSA approved.
Most CSA-certified pickups retain that approval only when
used as part of a specific certified system or assembly.
UL, CENELEC, and some CSA approved pickups may be used with
any instrumentation.
|
|
M208
MAGNETIC
PICKUP: power source, long reach
This magnetic pickup can
power other instruments. It has a high sensitivity which
makes it good for low speed (<300 rpm), larger gear (>2
inch diam.) applications. It has a long reach (5.125 inches),
a 3/4-16 thread and is CSA approved.
Most CSA-certified pickups retain that approval only when
used as part of a specific certified system or assembly.
UL, CENELEC, and some CSA approved pickups may be used with
any instrumentation.
|
|
