|
|
|
A210
Multifunction 3-Phase Power Meter |
|
|
Low
Speed 4 Digit Tachometers
from Mod-Tronic Instruments |
 The
LST-100L
is the lighted version of the LST-100. It is specially designed
to display very low speeds.
It features a field-selectable pulse rate multiplier that increases
signal pulse rate by a factor of 10 or 100. It is a solid- state
instrument that is well sealed for rugged indoor and outdoor
applications.
It has a large, lighted, 4-digit display. Gate time range: 0.13
to 2.85 seconds.)
|
|
1/4
DIN Temperature Controller and Process Controllers |
 The
Love 2600
Series 1/4 DIN Digital Temperature Controller and Process Controllers
offer a high level of standard features in an economical 1/4
DIN package.
Featuring universal input for thermocouples (J, K, E, T, L,
N, B, C, S, R), RTDs (100 ohm Platinum NIST, 100 ohm Platinum
DIN, 120 ohm Ni Industrial, 1000 ohm Plt. DIN), differential
input (-10 to +10 mVDC), and process input (0 to 20 mADC, 0
to 10 VDC); the 2600 Series offers easy setup for most temperature
and process applications.
A standard 24 Volt isolated, regulated power supply is included
to power most standard 4 to 20 mA transmitters.
|
|
Miniature
DC Temperature Controller
from Mod-Tronic Instruments |
The
model CT325
Miniature DC Temperature Controller measures only 1
x 1 x 1.5 inches but can control up to 240 watts of heating
power!
The Miniature DC Temperature Controller is powered from a single
DC supply that provides power to the control electronics as
well as the heating element. The miniature design accepts 100
or 1000 ohm Platinum RTD or 50 k-ohm thermistor sensor input.
It is ideally suited for use with Minco's temperature sensors
and Thermofoil™ heating elements, providing a complete
thermal system from a single source.
|
|
Explosion-Proof
Room Sensor For Wall-Mounting |
|
 Explosion-Proof
Room Sensor For Wall-Mounting
How do you safely sense ambient
air temperature in a hazardous atmosphere? This problem has
long puzzled contractors designing HVAC/R systems for paint
booths, chemical storage rooms, explosives plants, and other
installations where flammable materials may be present. Until
now, the only solution has been a bulky, probe-style explosion-proof
assembly which was designed for insertion into a pipe, not
mounting on a wall.
Now
Minco introduces a series of RTD's and thermistors packaged
in a compact (3.7" x 2.0" x 1.6") explosion-proof enclosure
that is UL-listed and CSA-approved for Class I, Groups C and
D; Class II, Groups E, F, and G; and Class III areas. (Request
Minco Application Aid #19 for an explanation of these classifications.)
|
|
10,000 Ohm Flexible RTD Temperature
Sensor |
|
 10,000
ohm Thermal-Ribbon™ RTD introduced.
A new surface-mount style temperature
sensor packs a 10,000 ohm platinum RTD into a flat package
measuring only 5 x 15 mm (0.2" x 0.6"), and less than 2 mm
(0.08") thick over the sensing area. The large base resistance,
compared to more common 100 and 1,000 ohm versions, gives
this new RTD a sensitivity of nearly 40 ohms per degree C.
That allows precise 2-wire measurements over narrow temperature
intervals using simple input circuits. Yet, at the same time,
the RTD follows the well-defined platinum curve over the extended
range of -50 to 200°C (-58 to 392°F).
|
|
