|
 Love
Controls produces a large variety of SensorPulse
Signal Conditioners, Transmitters, Alarms. From Loop Powered
Transmitters, Signal Conditioning Blocks, Loop Alarms to Frequency
Isolated Converters, Current Indicators, and Pressure Transmitters,
we have the product avaialble to meet your requirements.
 The
Love Controls SCU's are universal analog input, Loop
Powered Transmitters for isolation, display, and retransmission
of all common process sources. The input allows selection of one
of eight thermocouple types, three RTD types, and scalable voltage
(0 to 10 Vdc) and current (0 to 20 mAdc) signal sources.
 The
MSC, Micro Signal
Conditioning Blocks, from SensorPulse represent state of
the art signal conditioning technology. Models feature 2 & 3 way
isolation, programmable outputs, digital calibration, high accuracy,
and high density terminal block DIN rail packaging.
 The
Love Controls SC1290 and SCL1290 Loop
Alarm accept inputs from most thermocouples. Relay outputs
may be set for latching or non-latching. Alarms may be set for direct
or reverse action, high or low function, and have normally open
or normally closed contacts, thus providing a large number of combinations
of output behavior. Output behavior is easily programmable via switches.
Among the choices the user may make is to cause the relay to energize
or de-energize at the trip point, trip on an increasing or decreasing
signal, and place the trip point above or below the dead band.
 The
SC448 and SCL448 Strain
Gauge and Bridge Isolators/Transmitters allow low cost retransmission
of any Strain Gauge or Bridge circuit. Featuring two fixed and two
variable excitation supplies, the Love Controls SC448 and SCL448
can isolate and retransmit to a wide variety of external devices
with standard process signals.
 The
SC478 and SCL478 Frequency
Isolators/Transmitters allow low cost retransmission of
any AC Sine Wave source from 50 mV to 150VRMS and 2 to 10,000 Hz.
Featuring push button setup, the Love Controls SC478 and SCL478
Frequency Isolators/Transmitters can isolate and retransmit
to a wide variety of external devices with standard process signals.
SensorPulsess
MSP family of Analog
I/O Blocks offers the freedom to use any analog sensor with
many models of PLC. Each MSP block provides a single analog input
(or output) interface between the PLC and the analog world. Communications
between the MSP unit and the PLC is through a patented protocol
that provides truly "open" architecture for analog signals to be
processed digitally. |
