Hydra-Tech S3T 3" Sewage/Wastewater Pump
Hydra-Tech S3T model is designed for pumping jobs such as construction sites and manhole pumping where lightweight, high volume, trash pumps are needed. It has the ability to pass through a 12" opening and pump in debris laden areas. A small hole strained is available for limiting solids to be pumped.
Features
Variable Speed
Vortex Inpeller for Solids Handling
Dependable Gear Type Hydraulic Motor
Oil Lubricated Seals (Can Run Dry)
Safe Hydraulic Drive Can Be Used Where Electric Power is Hazardous or Impractical
Small overall size allows for use in very tight spaces
Can be bolted to Standard Pipe Flange and used as an In-Line Booster Pump
Operates With Our HT11 and HT13 Power Units or Other Hydraulic Power Sources with flows of up to 8 GPM and pressures to 2500 PSI. Can also be driven by larger power units when fitted with optional flow control
Recommended Power Units: HT11D, HT13G, HT11DXR
Specifications
WEIGHT S3T:.............................................. 25 lbs. (11 kg)
S3TDI:........................................... 48 lbs. (22 kg)
HEIGHT:............................................................. 14" (36 cm)
DIAMETER (@ widest point):....................... 11 3/4" (30 cm)
DISCHARGE:....................................................... 3" NPT(F)
INLET FLANGE:.............................................. 3", 125# ASA
SOLIDS HANDLING:.................................... 2 1/2" (63 mm)
HOSE PORTS:..................................................1/2" NPT (F)
PUMP BODY S3T:.............................................. Aluminum
S3TDI:........................................ Ductile Iron
IMPELLER:.................................................... Stainless Steel
WEAR RING....................................................... Ductile Iron
SHAFT:..................................................... Plated 4140 Steel
SHAFT SEAL:.................................... Carbon/Ceramic (Std)
ELASTOMERS:................................................ Buna N (Std)
HYDRAULIC OIL:................ 214-320 s.s.u. @ 100°F (64°C)
INPUT FLOW:.................................... Max. 8 GPM (30 LPM)
OPERATING PRESSURE:............ Max. 2500 PSI (170 Bar)
POWER SOURCE:....... Any Open Center Hydraulic System
Hydra-Tech S3T 3" Sewage/Wastewater Pump
