Axial Flow High Volume Pumps
The Hydra-Tech SP6 6" Axial Flow High Volume Pumps is a lightweight axial flow pump designed for pumping high volumes of water at relatively low heads. The propeller design allows this pump to driven by small hydraulic power sources such as small tractors, backhoes or our 10 to 15 HP power units. This pump is great for lake draining, tank filling, flood irrigation, arial firefighting and cofferdam de-watering.
Quick Specs
Discharge Size: 6 Inch
Maximum Flow: 1180 GPM (4450 LPM)
Maximum Head: 25 Feet (7.5 M)
Hydraulic Input: 7 GPM (26 LPM) Max.
Hydraulic Pressure: 2500 PSI (170 Bar) Max.
Weight: 43 lbs. (19 Kg)
Key Features
High Volume Axial Propeller design
Very Light Weight allows for one man set-up
Small Overall Size allows for use in very tight spaces
Variable Speed hydraulic drive
Oil Lubricated Seals (can run dry)
Dependable gear type hydraulic motor
Safe Hydraulic Drive can be used where electric power is hazardous or impractical
Operates with our HT10 to HT15 power units or other hydraulic power sources capable of flows of 5 - 7 GPM
Specifications
WEIGHT: 43 lbs. (19 kg)
HEIGHT: 16" (41 cm)
DIAMETER (@ widest point): 11 3/4" (30 cm)
DISCHARGE: 6" NPT(F)
SOLIDS HANDLING: 3/4" (2 cm)
HOSE PORTS: 1/2"
NPT PUMP BODY: Heat Treated Aluminum
PROPELLER: Ductile Iron
WEAR RING: Ductile Iron
SHAFT: Plated Steel
SHAFT SEAL: Carbon/Ceramic (Std)
ELASTOMERS: Buna N (Std)
HYDRAULIC OIL: 214-320 s.s.u. @ 100°F (64°C)
INPUT FLOW: Max. 7 GPM (26 LPM)
INPUT PRESSURE: Max. Cont. 2500 PSI (170 Bar)
POWER SOURCE: Any Open Center Hydraulic System
Recommended Power Units:
HT11D, HT13G, HT11DXR
SP6 Spec Sheet
