The Hydra-Tech S18M - 18" Hydraulic Submersible Axial Flow High Volume Pumps is designed for pumping high volumes of water at low to medium heads. The mixed flow impeller allows this pump to be used in a wide range of applications including lake draining, stream by-pass, flood control, drydock, foundation and cofferdam de-watering.
Quick Specs
Discharge Size: 18 Inch
Maximum Flow: 10,000 GPM (37,500 LPM)
Maximum Head: 60 Feet (18 M)
Hydraulic Input: 70 GPM (265 LPM) Max.
Hydraulic Pressure: 2500 PSI (170 Bar) Max.
Weight: 897 lbs. (406 Kg)
Features
High Volume Axial Flow design
High Efficiency mixed flow impeller
Small Overall Size allows for use in tight spaces
Variable Speed hydraulic drive
Oil Lubricated Seals (can run dry)
High Efficiency Balanced Vane hydraulic motor
Safe Hydraulic Drive can be used where electric power is hazardous or impractical
Operates with our HT100 to HT150 power units or other hydraulic power sources capable of flows of 50 - 70 GPM
Specifications
WEIGHT: 897 lbs. (406 kg)
HEIGHT: 55" (140 cm)
DIAMETER (@ widest point): 34" (86 cm)
DISCHARGE: 18" O.D. Pipe or Flange
SOLIDS HANDLING: 1" (25 mm)
HOSE PORTS: 1 1/2 " NPT
HYDRAULIC COUPLINGS: 1 1/2 " Wing Nut Style
PUMP BODY: Cast Iron
IMPELLER: Bronze
SHAFT: Stainless Steel
SHAFT SEALS: Carbon/Ceramic (Std)
ELASTOMERS: Buna N (Std)
HYDRAULIC OIL: 214-320 s.s.u. @ 100°F (64°C)
INPUT FLOW: Max. 70 GPM (265 LPM)
OPERATING PRESSURE: Max. Cont. 2500 PSI (170 Bar)
POWER SOURCE: Any Open Center Hydraulic System
S18M Axial Flow Pump Spec Sheet
