|
|
Industrial Paint Stripper JEM
Strip 427
|
|
STRIPS
ALL METALS
Without corroding any profits.
JEM
STRIP 427 is a powerful, biodegradable formulation
that safely strips all painted
and powder coated metals including aluminum,
zinc, magnesium, and titanium without corrosion.
So instead of paying top dollar to send
challenging jobs out, you can keep your
stripping and your profits where they belong:
in your own shop.
|
WORKS
FAST
So your crew can work faster.
JEM
STRIP 427 may be easy on the environment,
but it's tough on paint. Just drop the job
in the tank, agitate if desired, and in
minutes you'll have a sparkling piece of
metal. And because JEM STRIP 427 has no
Phenyl odor, your crew can keep their focus
where it belongs: on shipping as many parts
per hour as your daily workload demands.
|
|
LASTS
FOR YEARS
Cuts disposal fees by thousands.
With
ordinary strippers, you start with a drum
full of toxic chemicals and end up with
a drum full of toxic (and slow-acting) gunk.
Add the cost of chemical disposal fees over
the course of a year, and you're looking
at damage to your profits and the environment.
Only JEM STRIP 427 comes with its own mineral
oil seal to reduce evaporation and dragout
while it protects your crew from harmful
odors. The result? With proper filtration
and JEM ADDITIVE 425 one tank of JEM STRIP
427 lasts for years, and reduces chemical
disposal fees to 1/6 of their former cost!
|
THE
SECRET TO
EXTENDED TANK LIFE
JEM
ADDITIVE 425 is our exclusive formulation
designed to boost the active ingredients
in JEM STRIP 427, so you get the most out
of every tank.
JEM ADDITIVE 425 replaces dragout and restores
the ideal chemical balance, so a single
tank of JEM STRIP 427 can last five years
or longer!
|
| JEM
STRIP 427
JEM
STRIP 427 is a powerful blend of chemicals
which is unmatched in the paint stripping
industry for strength, safety and environmental
considerations. It rapidly strips
both powder and liquid coatings.
Jem Strip 427 has a proficient record
of achievement which we would be glad
to share with you.
Benefits:
- Contains
no methylene chloride, phenyl, chromates
or caustic.
- Effective
on polyurethane, epoxies, polyamides,
nylon, teflon and other commonly used
liquid and powder coatings.
- Safe
on Aluminum, Titanium, Magnesium,
Stainless Steel and High Strength
Steel.
- Additives
available to replace drag out and
evaporation.
- High
flash mineral oil seal floats on top
of stripper to reduce drag out, odor
and evaporation.
- Stripper
may be recycled. (Some states
give recycling credit.)
- Rinse
water may be discharged to industrial
waste treatment system in most localities.
(Consult local regulations.)
Uses:
JEM
STRIP 427 is used full strength at temperatures
between 1600 F and 1900
F. Mineral oil seal is supplied
with the stripper. Strip time
depends on coating type, thickness and
cure time. Strip time may be decreased
with mechanical agitation and by increasing
temperature.
JEM
STRIP 427 will not damage or remove
previously applied conversion coatings.
A
cold or hot water rinse is required
after stripping.
Warning:
Avoid water contamination of 427 to
avoid metal corrosion.
|
| Appearance |
Clear |
| Odor |
Mild |
| pH |
11.4 |
| Flash
Point |
Over
300 degrees F (TCC) |
| Rinsibility |
Complete |
|
V.O.C. |
Less
than 90 gm/ltr |
| Vapor
Pressure |
<0.0001
mm Hg |
|
