Sentech AS
At Sentech AS we use sensors and software to provide real time monitoring of water in any type of oil across several process industries. Our solution always yield a high return on investment! It all starts with the SeCaP sensor: Compact – less than 1 inch in diameter and length Non-intrusive – no pressure drop or flow obstructionsExtremely robust – takes temperatures up to 225 °C SeCap can be used for applications where other technologies fall short, allowing operators to see through walls of vessels and piping.
Since 1995, Sentech AS has supplied more than 2,500 SeCaP sensors around the world.
|
While DP and guided wave radar level transmitters – and even mechanical floaters and visual gauges – serve their purpose in light, sweet crudes and generally when water separates easily from oil, heavier and more viscous crude oils introduce much more complex layers and less defined levels in production separators. With tight emulsions, long settling times and severe foaming, operators need better information to optimize separator throughput, and still avoid excess water on the oil outlet and liquid carry-over on the gas outlet. << Learn More >> |
|
The Sentech Water Cut Meter is the only brand on the market that can be installed in-line and measure from 0 – 100% Water across the whole circumference of any pipe diameter – even 24” and larger. This allows operators to take advantage of existing pipe routing, and avoids the requirement for extra piping, flanges and valves for bypass arrangements. << Learn More >> |
|
The SeCap™ Water Leakage Detector is a watchdog for measuring water leakages. An example is an oil filled container, such as control modules on sub sea installations. Control modules are filled with silicon oil to protect and isolate the different components << Learn More >> |
|
In onshore and topside offshore fields, water cut meters and probes have been used for nearly 50 years, and is a commodity that in some form or shape is deployed in nearly all conventional oil field developments. However, most water cut meters are designed for two-phase (oil & water) applications, while most subsea fields transport unprocessed multiphase flow to the surface. The traditional requirement for water cut meters for processing facilities applications (e.g. production separators) are thus rarely found subsea. << Learn More >> |
